The Wire crimping and tinning machine is a practical harness processing equipment, which not only improves production efficiency, but also protects operator.While realizing the traditional terminal crimping function, it can also dip a little tin function at the other end; it can completely replace the manual welding operation and avoid the physical influence caused by manual soldering or welding for a long time.

the wire crimping and tinning machine at single end

How to check the quality of the wire crimping and tinning machine.

First, stripping speed.

For the wire crimping and tinning machine, the speed of wire stripping is actually very important. For example, if the speed is too slow, then it will not achieve the expected effect of machines replacing manual works. generally speaking, the speed of wire crimping and tinning machine is generally between 2000 and 3000 times per hour. while the better-quality single-end tinning machine is often between 4000 and 8000 times per hour, of course, it will be much more expensive in terms of price, which is also a more direct and effective method for their respective quality.

complete wire harness with end tinning

Second, wire stripping tolerance.

The tolerance is inevitable even if the computer is directly controlled, the wire stripping error will be smaller, and the natural quality will be higher.The tolerance caused by different specifications are also obvious.At present, the tolerance of the wire crimping and tinning machine in the market can be controlled below 1mm + 0.2% of the cutting length.

Cable Stripping, Crimping and Tinning

Third, the effect after stripping the cable.

The phenomena of different wire stripping length, indentation of wire skin, unclean skin, and even copper wire stripping are obvious manifestations of substandard quality. From the actual effect of wire stripping, we can also directly judge the quality of the equipment. On the contrary, high-quality single-end tin dipping machine can naturally avoid this situation.

Fourth, judging from the running sound.

The sound of the high-quality wire crimping and tinning machine is very low, and the equipment of poor quality will make a noisy and shrill sound.